Good Lifestyle

Cleaning the headphone jack on your phone can literally be the last thing on your household task list and understandably. But the reality is that your phone has a ton of time nestled in your pocket or your handbag, where things like dirt, dust and other unspeakable debris can collect quickly. Since it is an open port, it is not protected at all, even thoughyour phone is sporty a heavy case. Fortunately, it's easy enough to clean your headphone jack using tools that you probably already have at home.

How do you know if your headphone jack is dirty? Most of the time, you can totally say simply by looking at him. But a fouling headphone jack can cause many sound problems, such as jumping, static and gradation of the sound. If you encounter problems with these problems or if you just want to give your phone, a deep cleaning (it'sone of the most managed things After all!), Continue reading for our three different headset jack cleaning methods. And for more phone cleaning tips, checkHow experts say you should clean your phone to stop coronavirus propagation.

How to use compressed air to clean your headphone jack.

The compressed air in a box can be used to hunt the dust on your keyboard - is easily the safest way to remove debris from your headphone jack. Intense pressure in the CAN can burst air, eliminating the accumulation and dust of even the smallest space. Compressed air is most often sold in computer, electronic and office supplies stores. For more recommendations that will make your life easier, checkThe 17 best cleaning products to keep your home as good as new.

Step 1: Remove any packing from the box.

Some cans include a plastic tongue to prevent accidental discharge from air during transport.

Step 2: Aim.

Take the nozzle directly on your headphone jack.

Step 3: Spray in the outlet.

Press the button to eliminate dirt, dust and plush of the plug.

How to use a cotton swap to clean your headphone jack.

The best thing about this method is that it only requires a common household article: a cotton swab. A minor disadvantage is the little chance that cotton can be stuck in your headphone jack, leaving you a more important problem than you started with. Follow these steps with caution to clean your headphone jack without happening.

Step 1: Cut the buffer.

Using a pair of extremely sharp scissors, carefully snipe cotton on each side of the tip to a slight angle. The top should come to one point, but again, only very slightly. Too much break will result in cotton becoming loose and possibly outlet.

Step 2: Wet the buffer.

Humidify your new cotton rod cut so lightly with water or alcohol to rub. Do not drip moist, just slightly moist so as not to ruin the metal inside the outlet.

Step 3: Insert the buffer into the plug.

Carefully insert the cotton cotton into the socket and make a circular motion to eliminate debris all around the inside of the socket.

Step 4: Dry the plug.

Remove the buffer and repeat it with a dry to eliminate any excess moisture.

How to use a paper clip to clean your headphone jack.

A bladder clip is the ideal size for this work. So, if yours seems otherwise beyond repair, try this method. Just make sure to use caution - the clip can damage the metal if you are too rough. For more miraculous cleaning tips, check27 amazing cleaning tips you want to know earlier.

Step 1: Unpleas your trombone.

Make sure it is also right that you can get it.

Step 2: Wrap it with adhesive tape.

Wrap a piece of ribbon-sticky side on the tip of the paper clip.

Step 3: Clean your grip thoroughly.

Insert the clip into your headphone jack and move it gently into a circular motion to eliminate dirt from all sides of the interior.